How To Change The Battery In A Honda Pilot Key Fob. Then, slowly and carefully press the pieces back together. Wedge the key edge into the top fob slot, twisting until the back pops off.
Use the key or a small flathead screwdriver to gently pry the key fob open. Repeat this process twice more. On the top side after you have removed the key, you will see a small opening between the two halves of the.
Check The Orientation Of The Battery To Know Where The Positive (+) And Negative (.
Make sure the pieces don’t fall loose as you open it. Release the button and turn the key to the “off. Do the following steps to change the battery in your honda key fob:
Press Your Thumb Down Right Above The Battery To Hold The Fob Together So The Contents And External Buttons Don’t Fall Out.
You can get the battery from different manufacturers such as sony, panasonic, energizer, and duracell. Line the back of the key fob up with the front half. Insert the key and turn to the “on” position.
Insert The Crossbar Between The Empty Spaces Of The Top Two Buttons, With The Crossbar’s Curvature Facing Outward.
Insert the battery back into the motherboard with the positive sign facing out. Insert the key and turn to the “on” position. Once the locks have cycled, your vehicle is in remote programming mode.
On The Top Side After You Have Removed The Key, You Will See A Small Opening Between The Two Halves Of The.
Once again hold the “lock” button for one second. Then, repeat the process two more times. With your free hand, remove the old battery and replace it with the new one.
If Your Keyless Entry Remote Has A Screw, Remove It Using A Jeweler’s Screwdriver.
Hold your thumb right above where the battery is located. When you turn the key fob, you will see a small latch at the back. Line the back of the key fob up with the front and press it.